Column JacketingConfines the concrete core so it can carry more axial load and deform without losing capacity, while restraining lap-splice failure in older, lightly detailed columns.
California B1 General Contractor · #960653 · Since 2011
Engineered to strengthen. Built to spec.
Seismic FRP retrofit and industrial coatings, statewide California. We install Henkel and LOCTITE Tyfo composite systems and American-made resinous floors from engineer-of-record drawings — on commercial, industrial, and multifamily assets.
Since 2011Building across California
CA B1 #960653Licensed general contractor
Statewide CaliforniaNorCal primary, statewide for the right job
Seismic FRP + CoatingsTwo lines, one engineering standard
1–2 business daysWritten, itemized bids back fast
Explore what we do
Two lines of work. One engineering standard.
Drawings, spec, install. Engineering in front, hands behind it — structural strengthening with externally bonded fiber, and industrial resinous floors, both installed to a certified spec and documented at handover.
Seismic FRP
Seismic Retrofitting & FRP Strengthening
Carbon and glass fabric, structurally bonded — column jacketing, shear and flexural strengthening, beam-column joints, and masonry retrofit, installed from EOR drawings to the Henkel and LOCTITE Tyfo system.
Explore seismic FRP
Industrial coatings
Epoxy & Resinous Floor Coatings
The other half of the shop — American-made epoxy, polyaspartic, polyurethane, and urethane-concrete systems for industrial floors, parking decks, and high-traffic commercial, installed per the manufacturer's data sheets.
Explore coatingsWhat FRP does
From bare concrete to structurally bonded.
Externally bonded fiber adds tensile capacity, confinement, and ductility without adding meaningful mass — placed exactly where the engineer of record calls for it.
Shear StrengtheningSupplies additional shear reinforcement to beams, columns, and walls when transverse steel is insufficient for current loads or revised seismic demand.
Flexural StrengtheningIncreases bending capacity by adding externally bonded tensile reinforcement to the tension face of flexural members.
Beam-Column JointsAdds shear capacity and confinement at the joint region of non-ductile moment frames, addressing a common deficiency identified during a seismic evaluation.
Who we serve
Built for owners, engineers, and agencies.
Structural strengthening and industrial floors for the people who own, design, and approve the work — commercial, industrial, multifamily, and the facilities behind them.
CommercialOlder commercial buildings facing a code-triggered upgrade or a tenant-driven change in loading. Concrete and masonry strengthening sized to the engineer of record's drawings.
IndustrialPlants and facilities where columns, beams, and slabs carry equipment and process loads. FRP strengthening and industrial floor coatings in one mobilization where the scope allows.
MultifamilyApartment and mixed-use assets, including unreinforced masonry and soft-story stock subject to California retrofit ordinances. FRP often forms part of a larger envelope upgrade.
How a job runs
EOR drawings in. A spec engineered. A bid back.
We are honest about the shape of the company: the structural work is technical and the spec is written by other engineers. We bid and install to that package, with documented QA at handover.
EOR drawings in
The structural engineer of record issues the design intent — members, demand, target capacity, performance objective, and anchor calls. For coatings, we profile the slab and the wear, chemical, and traffic it actually sees.
System engineering
Henkel and LOCTITE in-house engineers produce application-specific drawings off the EOR documents — fabric, orientation, layers, overlap, anchorage. Coatings get matched to a Polymer Nation system against the manufacturer's data sheets.
Bid, mobilize, install
Written, itemized bids back inside 1 to 2 business days. On award we mobilize, prepare the substrate, and install primer, fabric, and saturant — or primer, body coat, and topcoat — with cure verification and QA documentation at sign-off.
The other half of the shop
American-made resin systems.
Epoxy floor systems for industrial floors, parking decks, residential, and high-traffic commercial. 100 percent solids epoxies, polyaspartics and polyureas, high-performance topcoats, urethane concrete, and chemical-resistant systems.
The resins are American-made and the applicator path is direct: we order from Polymer Nation, install per their data sheets, and back the work with their warranty when project conditions qualify.
Explore coatingsGot a project flagged for retrofit?
Written, itemized bids back inside 1 to 2 business days.
Send the engineer-of-record drawings or the floor scope. We spec the system, bid it itemized, and install it to that package across California.